RaceQuip's Latch & Link 5-point auto racing harness set has twin individual shoulder belts and is manufactured using premium 3 inch polyester webbing and drop forged steel hardware to exceed the SFI 16.1 rating. Shoulders adjust from 20 inch to 62 inch and the lap belt adjusts from 20 inch to 60 inch. All RaceQuip 711 series belts come as a pull down lap design, which means that the lap belts must be pulled down and away from the center latch & link buckle mechanism to tighten. All RaceQuip Latch & Link motorsports harness sets are distinguished by a pivoting hammer, called a Duckbill, which is located on the lap belt and locks all the belts into place by snapping down into a detent. Both shoulder belts and the sub-belt are hooked over the link; the link is inserted into the latch on the lap belt; the Duckbill is then brought down into and over the link, securely holding all the pieces in place. Since RaceQuip seat belt sets are double adjustable, lengths are simply adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place with the supplied ends (bolts not included). Snap hook ends and eyebolts are sold separately if the user wishes to install belts in that manner.
 
Features:
 
NOT D.O.T. / FMVSS Certified for On Highway Use
Premium 3 inch Polyester Webbing
Pull Down Style Lap Belt
5 Point Design - Single 2 inch Crotch Strap
3 inch Hardware Ends Installed
Double Adjustable for Ease of Installation
Wrap Around or Bolt-in Mounting
 Wrap Around or Bolt-in Mounting
Drop-Forged Steel Hardware
 Drop-Forged Steel Hardware
Shoulders Adjust from 20 inch to 62 inch
Lap Belt Adjusts 22 inch to 60 inch
 Lap Belt Adjusts 22 inch to 60 inch
Twin Individual Shoulder Belts